OPERATION OF WATER BATH

1.0 OBJECTIVE
For heating of highly inflammable substance or samples.
2.0 SCOPE
Heating.
3.0 RESPONSIBILITY
Concern Supervisors / Chemist
In-charge Q.C.,Q.A.
4.0 PROCEDURE
1. Before putting ON the water bath see that whether it is filled up with water , if not fill with water.
2. Adjust the water bath properly . Put it nearer to the tap.
3. Put it in a good position & place in such a way so that during condensation reaction maximum number of assembly can be run for use.
4. Ensure that whether the water is coming from tap or not .
5. Check the level of water in every 30 mins. so that you can fill the water.
6. Do not overflow water bath .
7. Fix wire of water bath & switch it ON.
8. After the completion of your work switch it OFF & remove your apparatus from the water bath.